Power Supply
The Deep Bass Nine has a voltage switch for 240 or 110 volts operaion. The switch is
preset for the country the unit supplied to. The correct mains cable is supplied.

Cleaning
Wipe the unit carefully with a moist cloth. Do not use solvents or abrasive cleaners.

Frequency Warning
The DB9 is an analogue synthesiser. Unlike current digital, sample-based machines the
DB9 produces a much larger range of audio frequencies, both lower and higher, so use
the DB9 with caution.

Setting up your Deep Bass Nine

Remove the synthesizer from its cardboard box (you’ve already done this as you’re reading
the manual). Do not throw this packaging away. It can be used to protect the machine in
transportation.

The DB9 should be mounted in a 19" rack, away from any flourescent lamps or
computer monitors.

With the DB9 power switch in the off position, insert the mains cable into the socket on
the back.

Connect a cable from the audio out of the DB9 into your mixing desk or amplifier.

Connect a MIDI cable from a MIDI controller keyboard, computer sequencer or other
MIDI device into the MIDI In socket on the back of your DB9.

Turn on the DB9 and enjoy.